MOLDING

Home

Molding

Tooling

Painting/
Secondary/
Finishing

Quality

Request?
Quote?
Contact Us

In our molding department, we produce regular injection, structural foam and structural foam counter-pressure parts. Our high pressure injection equipment ranges in size from machines with 55 ton - 2 ounce to 1500 ton - 265 ounce capacity. Most of these machines are equipped with process controllers. Our three structural foam machines can produce parts up to 35 lbs. each.

STRUCTURAL FOAM MACHINES:

·         BATTENFELD : 170 Metric Ton, 23.4lbs.

·         BATTENFELD : 300 Metric Ton, 19lbs.

·         SEIMAG : 385 Metric Ton, Double Barrels, 35lbs. and 20lbs.

HIGH PRESSURE MACHINES

·         HPM 1500 Ton, 260oz. Shot Capacity, Long Stroke, Wide Platen, Scoremaster Process Controller

·         FARREL 1000 Ton, 150oz. Standard Controller

·         FARREL 1000 Ton, 150oz. Standard Controller

·         CINCINNATI 1000 Ton, 165oz., with Scoremaster Process Controller

·         CINCINNATI 700 Ton, 110oz., Long Stroke, Wide Platen, with Scoremaster Process Controller

·         CINCINNATI 700 Ton, 110oz., with Scoremaster Process Controller

·         HPM 700 Ton, 110oz., Long Stroke, Wide Platen, AEC Robotic Arm, Scoremaster Process Controller

·         CINCINNATI 500 Ton, 64oz., Long Stroke, with Scoremaster Process Controller

·         NATCO 500 Ton, 80oz., Long Stroke, Wide Platen, with Scoremaker Process Controller

·         REED 500 Ton, 65oz., Long Stoke, with Scoremaker Process Controller

·         HPM 450 Ton, 60oz., with Standard Controls Solid State

·         CINCINNATI 375 Ton, 48oz., with PC-3 Process Controller

·         CINCINNATI 375 Ton, 48oz., with PC-3 Process Controller

·         CINCINNATI 375 Ton, 48oz., with PC-3 Process Controller

·         CINCINNATI 375 Ton, 48oz., with Scoremaker II Process Controller

·         CINCINNATI 300 Ton, 20oz., with Scoremaster Process Controller

·         CINCINNATI 250 Ton, 12oz., with Scoremaker II Process Controller

·         CINCINNATI 250 Ton, 16oz., with Scoremaster Process Controller

·         VAN DORN 250 Ton, 14oz., with SCI Pathfinder Process Controller

·         REED 200 Ton, 9oz. Shot Capacity, with Scoremaker Process Controller

·         REED 200 Ton, 12oz. with Standard Controls

·         CINCINNATI 150 Ton, 14oz., with PC-3 Process Controller

·         VAN DORN 110 Ton, 8oz., with Pathfinder II Process Controller

·         VAN DORN 80 Ton, 5.5oz., with Standard Controls

·         VAN DORN 55 Ton, 3.5oz., with Pathfinder Process Controller

·         KAWAGUCHI 180 Ton, 10.9oz., Relay Logic

·         KAWAGUCHI 375 Ton, 32oz., Relay Logic

*All High Pressure Machines are capable of molding structural foam parts as needed.

Avedon maintains a constant supply of raw materials through our ability to dehumidify 3,000lbs. of raw material per hour, from either the 200,000 lbs stored in our warehouse or 180,000 lbs. stored in plant silos.